Omnitouch 5.7e

[Daniel.Proulx]

Hi
I'm a new user on this forum, that I like very much.
I have 2 omnitouch 5.7e version 3.0.0.13 english. I'm wondering if I have the latest version and if there is other language available like French?
My automation studio is a 1.0.3.25 version. Since HAI stuff (software and harware) from Leviton are no more available, do I have the latest version? Is a french version available?
Many thanks HAI fans.
Daniel Proulx

 

[McKinneySmart]

I believe Ver 3.0.0.13 is the latest.

 

[pete_c]

Here last version of Automation Studio was 1.0.3.25.


Last version of OmniTouch 5.7e running here is: 1.0.3.13.

Have only one 5.7e screen set up now as it was too slow. Here went to using OmniTouchPro on my Windows tabletop tablets and it works great.

I cannot change the language when initially configuring OmniTouchPro these days.

 

[Daniel.Proulx]

Here last version of Automation Studio was 1.0.3.25.
View attachment 11505

Last version of OmniTouch 5.7e running here is: 1.0.3.13.

Have only one 5.7e screen set up now as it was too slow. Here went to using OmniTouchPro on my Windows tabletop tablets and it works great.

I cannot change the language when initially configuring OmniTouchPro these days.

Here last version of Automation Studio was 1.0.3.25.
View attachment 11505

Last version of OmniTouch 5.7e running here is: 1.0.3.13.

Have only one 5.7e screen set up now as it was too slow. Here went to using OmniTouchPro on my Windows tabletop tablets and it works great.

I cannot change the language when initially configuring OmniTouchPro these days.

Here last version of Automation Studio was 1.0.3.25.
View attachment 11505

Last version of OmniTouch 5.7e running here is: 1.0.3.13.

Have only one 5.7e screen set up now as it was too slow. Here went to using OmniTouchPro on my Windows tabletop tablets and it works great.

I cannot change the language when initially configuring OmniTouchPro these days.

Thank you Pete. Happy to discuss with a HAI lover. Is there a difference between Automation Studio and OmniTouchPro????
Since HAI as no more support, is there a way to get the OmniTouchPro????

Thanks!

 

[pete_c]

Automation Studio lets you program the touchscreens in OmnitouchPro. OmnitouchPro runs in Windows (XP ==> Windows 11).

I have learned to replicate my OmnitouchPro (one serial number) running application to other Windows devices by copying all of the directories that OmnitouchPro uses.

That is the only way that I can install OmnitouchPro today as the Leviton / HAI servers are down.

IE: today if you try to install OmnitouchTouch Pro with a new serial number it will not authenticate these days.

Looks like the Australian HAI wiki is no longer up these days.

 

[Daniel.Proulx]

Automation Studio lets you program the touchscreens in OmnitouchPro. OmnitouchPro runs in Windows (XP ==> Windows 11).

I have learned to replicate my OmnitouchPro (one serial number) running application to other Windows devices by copying all of the directories that OmnitouchPro uses.

That is the only way that I can install OmnitouchPro today as the Leviton / HAI servers are down.

IE: today if you try to install OmnitouchTouch Pro with a new serial number it will not authenticate these days.

Looks like the Australian HAI wiki is no longer up these days.

 

[Daniel.Proulx]

Hi Pete,
I do have a serial number license for Automation Studio. I read on this forum that you have 2 OmniTouchPro licenses and I don’t know what is the difference between both software. I have two 5.7e powered with automation studio and 9 omnitouch 7 screen installed.
Thanks!

 

[pete_c]

Omnitouchpro for Windows running will work if you have it enabled and running.

So Automation Studio is the designer for OmniTouchPro.

Do you have Omnitouch Pro running on any PC?

I took my running OmniTouch Pro software and copied over to another computer. It runs fine.

 

[Daniel.Proulx]

Hi Pete,
Don’t have, just automation studio.
Thanks!
Daniel

 

[Daniel.Proulx]

Hi Pete,
Don’t have, just automation studio.
Thanks!
Daniel

 

[planorich]

Does anyone have the firmware file for the Omnitouch 5.7e? I need the firmware file and updater.

 

[consultech]

Does anyone have the firmware file for the Omnitouch 5.7e? I need the firmware file and updater.

Hopefully I don't violate any site rules by posting this- it was public a while ago. If anyone knows how to update Automation Studio I would love to know. I have an OT7 locked with a custom file and a very original studio version. I may post in a new thread. Hope this helps

chk PM