happy_again
Member
I have just started up a new Elk M1 system with a XEP interface, and have been getting through this setup with the help of this forum and other online forums. I have had no luck getting the E-mail functionality to work. My ISP is TDS Telecom DSL connection with their posted DNS addresses as; 216.165.129.158 & 216.170.153.146. I use an Actiontec GT701D DSL Modem GT701 connected to a Belkin F7D4302v1 router.
I have updated both the M1 and the XEP to the latest firmware/bootware configurations. I can connect to the M1 virtual keypad, both locally and remotely, and can do the same with Elk RP. I have setup a GMX.com E-mail account, and can successfully telnet to the GMX IP address 74.208.5.67 via port 587. Port 25 is blocked by TDS, although they say they 'filter port 25' and allow tds.net E-mail addresses through port 25.. I have not been able to telnet TDS.net through port 25 or 587, so I keep focusing on the GMX mail account.
I am stuck... when I send a test e-mail through RP is says it is sending it, but I never receive it anywhere. I even sent Elk tech support a copy of the E-mail test results from using the XEP utility program, see below:
12:12:58 Send Email 0
12:12:58 Send Email Subject: Email Alert from Elk
12:12:58 Send Email GlobalSMTPType: 0, DNSGood: True, GlobalSMTPAddr: 74.208.5.67
12:12:58 Send Email smtp_addr: 74.208.5.67
12:12:58 Send Email To: *******@yahoo.com
12:12:58 Send Email Body: This is a test email from the ELK-M1XEP Elk
12:12:58 Send Email Username: *******@gmx.com
12:12:58 Send Email Password: *******
12:12:58 Send Email From: *******.com
12:12:58 Send Email Domain: @gmx.com
12:12:58 Send Email mailserv: 006029F0
12:12:58 Send Email MCSetDomain returned 0
12:12:58 Send Email MCSetSmtpAuthentication returned 0
12:12:58 Send Email MCNewMail returned 0, mailid=00608E40
12:12:59 Send Email MCSendMail returned FFFFFFFA <-----This is a problem, but I don't know what this means???
12:12:59 Send Email MCClose returned 0
12:12:59 Send Email Done
Ant thoughts?
I have updated both the M1 and the XEP to the latest firmware/bootware configurations. I can connect to the M1 virtual keypad, both locally and remotely, and can do the same with Elk RP. I have setup a GMX.com E-mail account, and can successfully telnet to the GMX IP address 74.208.5.67 via port 587. Port 25 is blocked by TDS, although they say they 'filter port 25' and allow tds.net E-mail addresses through port 25.. I have not been able to telnet TDS.net through port 25 or 587, so I keep focusing on the GMX mail account.
I am stuck... when I send a test e-mail through RP is says it is sending it, but I never receive it anywhere. I even sent Elk tech support a copy of the E-mail test results from using the XEP utility program, see below:
12:12:58 Send Email 0
12:12:58 Send Email Subject: Email Alert from Elk
12:12:58 Send Email GlobalSMTPType: 0, DNSGood: True, GlobalSMTPAddr: 74.208.5.67
12:12:58 Send Email smtp_addr: 74.208.5.67
12:12:58 Send Email To: *******@yahoo.com
12:12:58 Send Email Body: This is a test email from the ELK-M1XEP Elk
12:12:58 Send Email Username: *******@gmx.com
12:12:58 Send Email Password: *******
12:12:58 Send Email From: *******.com
12:12:58 Send Email Domain: @gmx.com
12:12:58 Send Email mailserv: 006029F0
12:12:58 Send Email MCSetDomain returned 0
12:12:58 Send Email MCSetSmtpAuthentication returned 0
12:12:58 Send Email MCNewMail returned 0, mailid=00608E40
12:12:59 Send Email MCSendMail returned FFFFFFFA <-----This is a problem, but I don't know what this means???
12:12:59 Send Email MCClose returned 0
12:12:59 Send Email Done
Ant thoughts?