Search results

I just received a replacement board because of an issue with the board not powering the sirens. I installed the new board and the sirens work, but it's not dialing out to my security provider (which worked on the old board). The board was installed exactly the same as the old board and nothing...

I'm having trouble with my OmniII Pro reaching my security provider. In PC Access, the number to dial and account numbers are right. I would like to verify that this same information is in the system. Is there a way to look for this info from a console? Under dial, I see dial out numbers...

I have 2 HAI-35A00-1 UPB Dimmers that aren't working. One I had hooked up wrong and stopped working, the other I bought last year and only got around to installing now which doesn't work. Are these worth repairing? Any recommendations on where to get them repaired? Thanks!

Sure enough, my system was set for weekly test on Monday's at 3am. I'll now figure out if there is a communication error. Thanks for everyone's help! This site is great.

Where would I check if the system automatically sends a test to the monitoring company?

About 3AM last night, my consoles started beeping - they stated "Communicator had Trouble". Anyone know what this could be from? This is the 1st time I've gotten this message - glad it was a message and not someone breaking in, but would like to stop it from happening again. Is there a...

My ISP is AT&T and am using "smtp.att.yahoo.com" It's the same SMTP that I use from for my email setup in outlook, so know that it works. However it requires port 465 and SSL. I've tried using port 25 and 465 in WL3 - neither work.

I'm using HAI's Video Server which has a decoder in it (I think).

I just tried leaving everything blank (other than the email address of where to send the message) and that didn't work either. Where does WL3 store the default settings for this server information - maybe that's where the problem is?

I'm looking to send a notification from WL3 to my cell in the form of a text. I'm pretty sure I have it set up right because it actually worked a few times, but the majority of times nothing happens. I checked the log on WL3 and I'm getting "553 From address not verified - see...

The camera's are Vitek IVR30's. The version of WL3 is 3.0.9287.0.

I'm not sure about SSL, but I'm having no luck getting this working. Email works fine, but when I use [email protected] or [email protected] nothing goes through. I've tried not entering any info on the advanced settings, to using exactly what I use for the email settings (that work) to...

Thanks for the quick reply. I can do that via email no problem, but when I enter the info into WL3, nothing happens. I'll have to play with the SMTP settings. Anyone using AT&T Email? If so, could you let me know what the settings should be? I've tried 25 (default) and 465 for SMTP -...

Hopefully there is no such thing as stupid questions - but is there a way to send text alerts on events? I have HAI OmniPro II, a home server and WL3. In WL3, I can set up a rule to send an email based on an event (like Alarm Triggered) and read somewhere you can send texts too. I do see...

I created a 'Take Nap' button that effectively does the same thing. However, it doesn't disable the beeps on the 5.7e only on my consoles. Is there a way to do this for the 5.7e?

I don't believe it's a networking or a rendering issue. I can access WL3 no problem from my iPhone, but when I click on the cameras it just states that there are no camera's configured - but the cameras work and show configured when I access WL3 from my computer. I just tried this, same...

I can't see my Camera's through WL3 on my iPhone. I access the cameras 4 different ways (all but the WL3 on the iPhone is working): 1. From a computer - accessing through WL3 - I go to www.myhomeserver.com/web-link - This works. 2. From the 5.7e - This works. 3. From a computer -...

Hello. I'm looking for someone interested in making some extra money. I got into Home Automation last year and just haven't had the time to work out all the kinks; nor be able to get to all the things I want to do. I'm pretty technically savvy, but know little about home automation and just...

I guess my point is that my thermo's are in locations in which the motion is triggered as you enter/exit a room and am trying to take advantage of the motion triggered inside of them. I was just hoping there was a way to do this instead of having to install motions at pretty much the same location.

I guess I'm just going by when the light comes on. All of mine are pretty sensitive (or seem that way) and the light comes on as you walk past it, which tells me the motion is triggered.