Search results

Or Comming out with a true Expansion Board for the Omni Pro II that would be a true (Network Board). That would have a lot more ability that what the meg. Board that came out. With a lot of the ability that I was talking about before. This would also allow for a a lot more memory for many more...

I am a big supporter of the HAI / Leviton Omni Line!   And It just may be time for them to come out with the next Gen. At least for the Pro Line.   Would be nice to have added features that really didn't exist when the Pro II came out.   A few things that I see at this point.   Time for the main...

I am thinking about getting the Omnistat2 and was wondering. Since it gets its power from the C. And doesn't have any batteries. Does it retain the Time on a Power Failure?  I would be hooking it up to a omni LTE panel. Will it set its clock from the Omni? day light savings? and such?   Thanks

Right now I have the Omnipro II with UPB Light switches. I am thinking about switching over to the Lutron RadioRA2. I would like to hear from anyone that has that system and there Thoughts about it. Reason I am thinking of switching is that REAL Time Status is really important to me. And...

I am a hunter douglas dealer and have wanted them to come out with a product like the Somfy serial bridge for some time now. At this point there really is no easy way to control the platinum 2.0 systems with automation. What I did and not saying it is perfect! I took the wall remote and took it...

Right now I have a whole home of the SA Switches and I went that way because of the Timers that they had built in them. I now see that HAI is finally adding timers to there wall Switches with the GEN 3. I want to know is there anything else that is new with them? Is this a true upgrade or...

Right now I have the Carrier Infinity HVAC with the Carrier infinity Thermostats. I do use the SAM to control it from the HAI OMNI PRO. I have been thinking about changing out the Carrier infinity Thermostats to the OmniStat. To have better control over the system. Any one have an Omnistat...

I am having problems with UPB. I am just starting to change over from Z-Wave to UPB and finding that it might not be worth it for me. I have right now 6 switches and am playing with UPB and what my problem is that Some of my Wall outlets the PIM does not connect to my switches. other outlets...

IS there a Step by step guide to getting the SA Switches/Dimmers to work with the HLC? I like how clean that looks room by room

Thanks so much!!! that was the Problem!! The Humidity is off on it's reading but I can work with what it is sending me!! Once again thank you!!!

I am switching over to UPB for my lighting. I have an OMNI PRO II. And am looking to use that as my main controller. Right now I am Playing with a few SA and HAI Switches. What is going to be my best way to go. I cant seem to get the SA to work with HLC on the omni and don't know if that...

I just installed the Extended range TEMP/HUMD Sensor and am having an issus with what it is reporting. I am getting an temp of 72 outside when it is only 50 out. And the Humd is reporting 92 - 108 % What could be causing this to be so OFF? Thanks for your help in advance!

does this even when not part of the network!!

each switch is running 6 CF bulbs. and also it is always the same one that is giving the the problem!! even after I put in all new Dimmers it is still the same one giving me the problem also.

I have been having a problem with one of my Cooper Z-wave Dimmer Switches. It is in a 5 Gang (Not that would make any diffrence). What is happing, When I push the switch to turn off the lights the Dimmer Switch shows that the lights are off but the Lights stay on. I have to pull the Little Pin...

Can you use the Driveway Sensor from HAI with an ELK M1G?

The only thing is that it is not timming out!!!! My Wife Turned off the alarm at 3:00 am and it was sill there at 7:00 am

In ek on my iPhone the area detail doesn't get updated when there is a change for say armed to disarmed and such even when I make changes from the iPhone. That is one example

The M1G is connected to the Network adapter with the supplied Ribbin RS-232 cable. Right now the Network addon is in the can with the rest of the Electronics that are there M1G, HAI Cellular Backup, Plus all the Addon boards. With all the electrical stuff in that Cabinet is the Ribbon Cable...

is there a way to change the setting on that? this one locatin will have that clock on untill i hit the star??