Search results

Hello, It's now working again and yes, there was no connection. I went back and re-traced the cables and had not connected them up correctly. Thanks heaps for your help, knowing how to measure the line voltage was also a great help

Thanks for getting back to me and my apologies for the delay in getting to this and replying. The reading was 0.8mv, which I'm guessing means that there is no phone line connected.

Hello, Our alarm is no longer dialing out when triggered and looking at the status from the control panel its reporting Off hook/idle. We are using a VOIP service and the the configuration is as follows. Phone port on the modem -> to OmniPro ->from OmniPro -> to phone. I've moved the modem...

Thanks for the reply. It so much "fun" From PC Access the firmware version is 4.0B. I have 2 battery's installed by the integrator, they are all 12V and I replaced the 2 of them. I did read somewhere in the forum that disconnecting the battery's for a week has solved this so I'm trying that at...

That was it! Thank you so much

Hello everyone, With the cold weather arriving in South Australia I've just noticed an oddity with our OmiPro II. If the heating is on when we set the alarm (Away) to leave the house the heating will turn off and the heat and cool setpoints changed to 16.9C and 29.5C respectively. When the...

Hello, I have an OmniPro II home automation system and the Vera 3 Z-wave appliance which allowed my to control the lighting and integrate this into the Omni. I use PC Access to update the Omni and use the Space app to control this from my iPhone. Unfortunately the Vera 3 is no longer...