Search results

Okay tried that and nothing happened.  Tried just pushing the button and also holding it down.   Took a screenshot of my ElkRP program and what I am seeing for this device.   [sharedmedia=gallery:images:858]  

  Sorry but I don't understand what you mean.  What is the wrong loop?  These are wireless devices.  These sensors do not have a tamper so not sure what I am suppose to do here.

Just bought 4 of these devices and they are not working. Whether I manually or automatically have the system detect them they are showing as zone violated. Checked my manuals and looking online and changing whatever settings I have have no effect. I am using Elk M1Gold with a Caddx receiver...

So if it is a corrupt database won't one of the default accounts get you in? It says the "System rejected the Remote Programming Access Code." That makes me think it is the code (password) that is wrong. I have tried the default and my only code I have used and neither worked. Could it be...

Yes I did go into regedit and remove the entries for RP2 but no luck. This is really frustrating.

Not not been successful in reinstalling RP2 without the error msg and still can not communicate with Elk through RP2, but CQC is still getting information from Elk. Anybody have any other suggestions as I need to get this fixed so I can make changes and add sensors. Thanks

Okay so did as you suggested and when I tried to reinstall Elk RP2 it says "Another version of this product is already installed. Installation of this version cannot continue. To configure or remove the existing version of this product, use Add/Remove Programs on the Control Panel." No matter...

Tried the default RP and this code gives the same error. I am using a straight serial port off a add-on card. Tried connecting to the serial port off the motherboard and got the same error msg. Why is my CQC program able to get information from Elk but I can not log in to it via RP2?

Tried blank template with same results. Can't be bad install as I have had this version for a long time and not changed it or upgraded my Elk. So I guess it could be a corrupt database. Using Elk RP ver 2.0.14. M1G Control ver 5.0.14.0. What is the default code for the RP Access Code? I...

Okay, so I did as you suggested and shutdown both my computer and Elk and disconnected the serial cable. Then I powered both on and reconnected the serial cable. And it works, sort of. I still can't connect to it with ElkRP2, still getting the same error, but I can connect to it with CQC...

Been using my Elk Gold since 2008 and been working find. Tried to connect today with ElkRP2, which I have been using for awhile with no problems, and getting an error: "Disconnected: System rejected the Remote Programming Access Code." I can arm and disarm the system fine with the keypad...

I have another question about setting rules for when the alarm goes off. I also have it call me but it will just tell me if it is security, fire, etc. I would like to know what was triggered: like the front door or kitchen window. How do I set the rule so when it calls me it can tell me this...

I have unplugged the battery and am still getting the low battery warning. Whether the battery is connected or not if I recycle the M1 power it does NOT clear the warning.

I have the M1G unit so you are saying it comes with the low battery cutoff module or should I get it? I ask cause it is just past 2 years and my unit is now saying low battery. I did not know how to silence the beeps, till reading this thread, so disconnected the battery and am still getting...

All my devices, DVD Player, PVR, etc are hooked up to a switch and then travel along the same cable from there to the bedrm. So I know it is not that cable as it works fine for some devices. Therefore it might be the cable running from the device with the problem to the switch. Will try that...

The cable run is about 70 feet. I had someone install the cable so don't have the specs on the cable, just know it is a combined cable for all 5 lines needed - component and stereo. Some equipment the sound is fine and others I need to turn the volume way up and that is when I hear the buzz...

Have my system setup to distribute the video and audio from the Theatre room to the TV in the M Bed room. The audio is using RCA stereo cables and I have to turn the volume way up on the TV to the point that I get a buzz sound also. Is this because the strength of the signal has dropped, it is...

Finally had time to work on it again. Got it to work, sort of. If I just press the doorbell like normal then I get nothing. But if I hold the doorbell button down then it works. So the unit is not detecting the quick change from a momentary button press, which is what most people do. How do...