Search results

Please refer to the M1 ASCII protocol document page 36. Note the "kf" command... If you send 09kf01000D5 followed by carriage return line feed to the M1, it will reply back with the "KF" string... The "KF" response will have the chime status for all 8 areas in the M1... Any time the chime...

Very interesting... Everything looks ok here... Is there any way you can export your ElkRP account and send it to Elk. I will setup a system with your accound to see if I can duplicate your problem... To export an account in ElkRP: Open up the account in ElkRP... Click on the "File" menu...

One last thing to try before we take drastic measures: On your WinXP machine, try to make a "Hyperterminal" connection to your XEP on port 2101. To access Hyperterminal, goto Start>Programs>Accesories>Communications>Hyperterminal Name the connection anything you want... In the "Connect...

Couple things to try: 1) Unplug the ISY from your LAN or completely power it back off. Power cycle your M1 and XEP (do not power back up the ISY). Allow the M1 to boot, and give a few minutes for the XEP to completely boot up. Test ElkRM to see if you get connected and everything is working...

Just a brief overview: ElkRM has a "three strikes and your out" routine for requesting data... In your first reply, you saw the following data: XMIT: 06rr0056 XMIT: 07ps30023 XMIT: 07ps30023 XMIT: 07ps30023 ElkRM tried to poll for status of the third lighting bank 3 times and then it...

This is one of those "undocumented features". It's mainly a tool for tech support to help trouble shoot problems like the one we are experiencing here... Hope it will help us out in this situation!!! Please note that if you have Russound equipment, it will show data from the Russound as...

Try the following steps: 1) Disable any firewalls/anti-virus temporarily (sounds like you have done). 2) Open ElkRP and connect to your panel. On the "Account Details" screen, click on the "M1XEP Setup" Button. Go to the TCP/IP Settings tab and do a "Receive". Verify that the Non-Secure Port...

AnotherOne is exactly right... You can find the protocol at the following link: http://www.elkproducts.com/pdf/ELK-M1_RS232_PROTOCOL.pdf

Sorry, there is no way to do this now...

You shouldn't have a problem getting all of this into the 14" cabinet. You should be able to mount the M1RB and the M1XOVR on the Elk-SWG's(Circuit board glides) to the left and right of the M1. The DBH will come on a 3" structured wiring plate that will allow you to mount it below the M1...

Please note that outputs 9-16 on the M1RB are relays... Outputs 7 and 8 are positive voltage outputs... You could wire in an external relay to outputs 7 and 8 to get the two other relays you need(10 sprinkler heads). This is assuming you do not need relays for other options... Don't forget...

Great!!! Hope everything goes well for you...

Everything sounds correct, and yes, you'll need to connect a jumper from the neg of the M1 to the spare1 since this is where you will be connecting your NEG of the P624. If you put +12V on spare2 on the M1DBH, you can use this wire to distribute power from your P624. If you have something you...

Your wiring for the add on P624 sounds good with one minor adjustment... You will need to common up the output NEG from the P624 to the M1G's NEG. Remember that the Elk-M1DBH has a "SPARE 1" and "SPARE 2" on the input terminal block. If you are not using these, you can use them to run your...

The ELK-M1KP2 has 4 F keys, if you just need a couple more you can do the following... On the keypad you need more F keys, set the F1's key backlight to follow output100 Write a couple of rules: Whenever F1 key is pressed on Keypad1 Then toggle output 100 Whenever F2 key is pressed on...

If you want to get fancy, you can use the F Keys to fire multiple events based on counters... Write rules like the following: Whenever F1 key is pressed on Keypad1 Then add 1 to counter1 If counter1 is greater then 5(or however many you use) then set counter1 equal to 0 Whenever F2 key is...

I use the F1-F4 keys for things that I use all the time... If I have something that I use less often, here is what I do: Create a couple new users... Make the codes simle like "1111", "2222", and "3333"... Do not make this user master or arm/ disarm, only check the access flag... Write a...

It sounds like you have the data bus configuration down... As far as speakers: Elk manufactures a small speaker that can be mounted behind the KP2. Please refer to the following link: http://www.elkproducts.com/products/elk-sp12f.htm This is a 32 ohm speaker that can be connected to OUT1 on...

If you are just using two keypads, you can simply swap your existing DSC keypads with the Elk KP's. The M1/EZ8's data bus is a high speed 485 data bus which need to be kept in series(no star/homerun topology). Home running the two keypads will require you to put the 485 terminating resistors...

The Elk-TS07/ElkRM software can view MJPEG streams from certain cameras that have been tested for compatibility. Please visit the following link to see a list of currently supported IP cameras/DVR's: http://www.elkproducts.com/products/m1/Elk...%20and%20DVRs:  Remember that you can also add...