Solar readings again

[dpenezic]

Ele34,

please read http://datasheets.maxim-ic.com/en/ds/DS2438.pdf document. If you dont understand what is written in it you have two option or believe what other people tell you, or learn how understand what is written in it.

On this way, you continuously ignore technical documentation, and confuse reader in this forum. Even spend they time reading wrong information.

Once again, you continuously talk about upper layer software which only interpret what is happened on native 1-wire protocol, and ADD some user friendly feature in library. So what you see from your position doesnt have to be same what 1-wire native protocol/chips real do.

Dubravko

 

[tparvais]

Hello

I also tried the Humidity/T°/solar sensors from hobby-board.

For solar, the Channel2 gives very small variation : from 0 to 0.0005 . Is that normal ? This is so small ?

Or there is a problem in my soldering ?

Thankyou

 

[dpenezic]

Hello

I also tried the Humidity/T°/solar sensors from hobby-board.

For solar, the Channel2 gives very small variation : from 0 to 0.0005 . Is that normal ? This is so small ?

Or there is a problem in my soldering ?

Thankyou

Hi,
Please provide picture of your board, that may help, also I found that is very easy to solder solar sensor on wrong direction, check if picture of solar module on http://www.hobby-boards.com/catalog/popup_image.php?pID=57 show same direction as your solar sensor.

Regards,
Dubravko

 

[tparvais]

Hello

I also tried the Humidity/T°/solar sensors from hobby-board.

For solar, the Channel2 gives very small variation : from 0 to 0.0005 . Is that normal ? This is so small ?

Or there is a problem in my soldering ?

Thankyou

Hi,
Please provide picture of your board, that may help, also I found that is very easy to solder solar sensor on wrong direction, check if picture of solar module on http://www.hobby-boards.com/catalog/popup_image.php?pID=57 show same direction as your solar sensor.

Regards,
Dubravko

it's correctly oriented.... help !

Thank you

Thomas