Barometer

[Yostie]

I am running thermd with a hobby boards barometer. In my config file I have
<Sensor AF000000A6BB4F26>
Name "Barometer Pressure"
Type Barometer
Slope 0.7423
Intercept 26.5154
</Sensor>

And I calibrated the barometer. I am powering it with a hobby boards power inverter. When I run thermd I get reading sometime but there is no pattern to it, sometimes an hour apart and sometimes 10 minutes. when I run thermd in verbose I get a "under driven" comment about the sensor if it is not reading. Any help would be great thanks

 

[ericvic]

Can you run the OneWireViewer and let me know what the Channel 0 and Channel 1 reading are for the DS2438 on the Barometer. You can find Channel 0 and 1 under the AtoD tab.

Eric