M1G

From CT.wiki

Features

• Flash Memory - Allows field updates to firmware
• 16 On-board Input Zones, expandable to 208, analog supported
• Wireless Capability
• 13 On-Board Outputs: 1 voice driver/siren, 1 siren driver/voltage, 1 form C relay, and 10 low current (50 mA)
• Two Way Listen-in capability via Central Station or Telephone
• Time/Date stamped 512 Event History Log
• Menu driven keypad programming - No Manual Required!
• Supports 4 wire (any zone) and 2 wire (zone 8) smoke detectors
• Includes Fire Alarm Verification Routine
• Can be partitioned into 8 separate areas and accounts
• 99 User Codes (4 or 6 digit) with assignable authorities
• Arm levels: Away, Stay, Stay Instant, Nite, Nite Instant, Vacation
• Hardware “Watchdog” and Nonvolatile EEPROM Memory
• Telephone Line Fault with alarm output
• True Modem for fast reliable upload/download
• Digital Dialer: SIA, Contact ID, 4 + 2, and Pager (8 phone numbers)
• Elk-RP PC Programming Software includes conflict resolution
• Powerful “Whenever/And/Then” RULES Programming
• Rules utilize easy to understand text based references
• Control Lighting using on-board 2-way Power Line Carrier (PLC) or RS-232 Serial Port(See Note-1) for On, Off, Pre-set Dim, All On, All Off, and Scenes commands
• Astronomical Clock for Sunset/Sunrise calculation and activation
• Transmit and receive Custom Serial ASCII strings(see Note-1)
• Read Temperature Sensors and communicate with up to 16 Thermostats
• Turn on Tasks, Lights, and Outputs via Keypad and PC browser
• Interfaces with a broad range of other systems
• Heavy duty - 2.5 Amp power supply w/ 1.5 Amp continuous
• Dynamic Battery Test, Zone Voltage Display, and Voltmeter
• PTC (fuseless) resettable overload protection
• Voice announcement of alarms, zone descriptions, status, etc.

500+ Word / Phrase Vocabulary
Link up to 6 Words / Phrases per announcement
10 custom recordable Words / Phrases

• Built-in Telephone Remote makes any phone a keypad
• Integrated Voice Dialer uses vocabulary or custom word / phrases
• Phone Number Capacity: 8
• On-Board Serial Port, expandable to 8 Serial Ports
• Plug-in Terminals make service and pre-wires a snap!
• Installer Telephone (buttset) Test feature
• Master Power Switch and Low Battery Disconnect
• Multiple Auxiliary Power Terminals
• Built-in Volt and Current Meter

(Note-1) Requires optional EZ8MSI or M1XSP serial ports.

Configurations

• ELK-M1GCB M1 Gold Control board only (in clam shell case) For use in structured wiring enclosures, trim-outs on pre-wired jobs, or as a spare or replacement board. This is the main M1 Gold circuit board in the clam shell protective case - “the brick”. It can be mounted directly to almost any surface. Plug-in terminal blocks are not included, order

separately as ELK-M1BLOCKS. • Size: 8.375” W x 10” H x 2” D

• ELK-M1GOLD M1 Gold Control Board in SWB14 Metal Enclosure
• ELK-M1GSYS4 M1 Gold Control KIT This “ready to install” value package includes the M1 Gold Control, SWB14 metal enclosure, M1KP LCD Keypad, ELK-1280 8Ah battery, ELK-RJSET, ELK-73 paintable interior speaker, plus Lifetime warranted ELK-TRG1640 transformer.
• ELK-M1GK Same great “ready to install” value package as M1GSYS4 in cardboard only (no metal enclosure) for use in a structured wiring box

M1 Rules

The M1G automation functions can be controlled and customized through the use of "rules" that form a simple but powerful programming language that is a standard feature on M1 controls.