M1EZ8

From CT.wiki

Features

• Flash Memory - Allows field updates to firmware
• 8 On-board Input Zones, expandable to 200, analog supported
• Wireless Capability
• 12 On-Board Outputs: 1 siren driver/voltage, 1 Relay, & 10 low current (50 mA)
• Two Way Listen-in capability via Central Station
• Time/Date stamped 512 Event History Log
• Menu driven keypad programming - No Manual Required!
• Supports 4 wire (any zone) and 2 wire (zone 8) smoke detectors
• Includes Fire Alarm Verification Routine
• Can be partitioned into 8 separate areas and accounts
• 99 User Codes (4 or 6 digit) with assignable authorities
• Arm levels: Away, Stay, Stay Instant, Nite, Nite Instant, Vacation
• Hardware “Watchdog” and Nonvolatile EEPROM Memory
• Telephone Line Fault with alarm output
• True Modem for fast reliable upload/download
• Digital Dialer: SIA, Contact ID, 4 + 2, and Pager (8 phone numbers)
• Elk-RP PC Programming Software includes conflict resolution
• Powerful “Whenever/And/Then” RULES Programming
• Rules utilize easy to understand text based references
• Control Lighting using on-board 2-way Power Line Carrier (PLC) or RS-232 Serial Port(See Note-1) for On, Off, Pre-set Dim, All On, All Off, and Scenes commands
• Astronomical Clock for Sunset/Sunrise calculation and activation
• Transmit and receive Custom Serial ASCII strings(see Note-1)
• Read Temperature Sensors and communicate with up to 16 Thermostats
• Turn on Tasks, Lights, and Outputs via Keypad and PC browser
• Interfaces with a broad range of other systems
• Heavy duty - 2.5 Amp power supply w/ 1.5 Amp continuous
• Dynamic Battery Test, Zone Voltage Display, and Voltmeter
• PTC (fuseless) resettable overload protection

(Note-1) Requires optional EZ8MSI or M1XSP serial ports.

Configurations

• ELK-M1EZ8CB M1EZ8 Control board only For use in structured wiring enclosures, trim-outs on pre-wired jobs, or as a spare or replacement board. This is the main M1EZ8 circuit board with mounting hardware. It can be mounted directly to almost any surface. Size: 6.5” W x 6.75” H x 1.5” D
• ELK-M1EZ8 M1EZ8 Control Board with 12” x 12” Metal Enclosure
• ELK-M1EZ8KB M1EZ8 Control KIT This “ready to install” value package includes the M1EZ8 Control, UB12 metal enclosure, M1KP LCD Keypad, ELK-1250 5Ah battery, ELK-RJSET, SP35 speaker, plus Lifetime warranted ELK-TRG1640 transformer.
• ELK-M1EZ8K Same great “ready to install” value package as M1EZ8KB in cardboard only (no metal enclosure) for use in a structured wiring box.