Search results

I have a client with a rather large HAI Omni ProII system where the keypads will not turn off. Yes, they are set to timed, all have unique console addresses and the system has been defaulted several times. I have disconnected the panel from the network to rule out any weird networking issues and...

Does anyone have experience wiring in a TG1-Express with an Omni Pro II panel? Can you successfully use the Telguard app to arm/disarm the system? Any wiring diagrams?   Thanks!   Joe

I just received an email from Encore Controls mentioning the "FireFighter" smoke alarm detector.   http://encorecontrols.com/products.php   This is a wireless sensor that integrates into certain alarm panels which senses line voltage smoke detectors when they trip-very interesting.   Has anyone...

Hello, Has anyone used magnetic locks and the HAI card reader on a commercial scenario?  I know that in PA you need to forms of egress. I have someone that is looking to do a single door and a mag lock is the only option.   Thanks,   Joe

Can I use the HAI 10A11-1 - Two Way Audio/Voice Alarm Module's line out and go into an external amp for zone opening announcements? I have a customer who is insisting he hear when a zone is opened. I will probably use some sort of 8ohm in-wall/ceiling small speakers throughout the home.  ...

Just checking to see if anyone else is having the same problem with Haiku Helper sending notifications. I am running version 2.22 (2.22) which was recently updated the other day and now push notifications are no longer working. The host OS is 10.7.3. I can connect to the controller with Haiku...

Hello, I do not know if I am going about this in the wrong way, but I would like to be able to view my cameras on the WAN that are configured for my LAN in the Haiku app. Is there a way to push the camera data through the Haiku app rather than setting up dyndns accounts and port forwarding for...

I have a new project that I want to tackle and I am not sure what components to use. I have a new hd enclosure that has an LED light on the front (blue=everything ok, red=failure). When the led changes to red I would like to send an email. I figured I could monitor the voltage for the red leg...

Hello, I am looking for an electronics engineer or someone that can build me a prototype for an idea that I have. This individual should be familiar with both high and low voltage and wireless technology is a plus. Please pm so we can discuss in further detail. Thanks!

Hello All, I am looking to install a tv, 19-36-Inch, above a soaking tub and wanted some feedback. Has anyone here installed a tv in the bathroom? Moisture is a concern so this must be taken into consideration. Thanks

I just purchased a relay in a box (RIB) and have never used a relay before. The model in question is the RIB01SBDC. For the most part the connections look pretty straight forward, but I do have some concerns. The purpose of this RIB is to control the on/off function of another device. So I need...

Hello All, I am installing a Cartell CT-2B probe which will connect to an Omni Pro II. The Cartell control box has inputs as follows: 1=+12v 2=negative 3=18vdc 4=Transient Suppressor 5=NC 6=C 7=NO 8=annunciator 9=annunciator 10=Probe Red 11=Probe shield 12=Probe Black There is a ground...

I am looking for the RadioRa 2 programming software. Does anyone have this? Thanks!

Hello! I have a habit of turning off my A/C systems when there is a lightning storm approaching. I have 3 RC2000 Thermostats connected to an Omni Pro II and would like to somehow automate this process. Is there such a device to detect or “see†lightning? I would even shut down the units in a...

I had a party last week and was annoyed when all of the little kids kept opening and closing the perimeter doors. The doors are set to beep when open. Is there a way to create a button to disable the door for x amount of time and then reenable? Thanks

Hello, I am planning to install several IP cameras this summer, but do not know how to modulate them to all the tv's in the house. I have Verizon Fios-so there is digital cable in the house. I have been reading that it is not as easy to modulate with the digital cable as the channels are not...

Hello All- I am currently attempting to connect my smoke alarms, all 18 of them! Here is the bill of materials: HAI Omni Pro II with the latest firmware Altronix AL300ULXR Power Supply DSC Power Supervision Relay DSC Polarity Reversal Module DSC-FSA410BS Smoke Detectors The house is divided...

Well I am at the point in my install where I am starting to consider at front end GUI. Over the past week or so there has been great debate over the pricing structure of CQC, but I am just looking for some general direction. Here is a current setup of my functions: Omni Pro II 3 HAI RC2000...

Hello All, In preparation for the summer season I would like to have some sort of sensor for my inground pool. This sensor would alarm with an occupant(s) in the pool. I have found many devices that are standalone, but none that will tie into the omni pro II. Has anyone else done anything like...

I was woken a 2am today to the alarm blazing. The high winds knocked out the phone line for a couple of minutes and then everything was back to normal. One problem I did encounter was that I was not able to turn off the alarm at the keypad. I had to pull all power from the system until the phone...