Search results

Interesting. When the check update fails it gives me the link http[s]://www.HomeAuto.com/Downloads/Updates/v4/?Variant=PCA3D_EN&Serial=[my serial number]&File=0version.xml Are you able to get to the base url?   I tried homeauto.com against urlscan.io and isitdownrightnow.com and both say the...

I get a server not found error when trying to update from 3.17.0.843, also get an error when hitting https://www.homeauto.com from a web browser (tcp reset from server).  Is this an expected outage?

Follow up that once I set the wireless receiver to something besides A1 it started behaving.  It was quite annoying as when I got the error the keypad would beep incessantly and not being able to interact with it the only way to get it to stop was to remove power to the controller.     I will...

I tried building a RJ12 to DB9 serial adapter based off this post and http://kb.homeauto.com/default.asp?id=545&SID=&Lang=1 and failed miserably.  Thankfully this was for a second PIM and my first one had come with a 36A05-1.  Ended up taking the factory adapter apart.  As far as I could tell it...

I have one expansion enclosure (17a00-1) and the console currently connected.  Had the weird no data error once it is attached on console A/B.  Gave it power only and did the hold both button reset.  Set expansion enclosures to 2 in PC access, still getting the odd no data000 on the console but...

I picked up and Amazon warehouse deal 45a00-1, but am having trouble installing it.  If I connect it to the console 12v/ground/A/B my console freaks out and says no data.  Trying to interact with the console it does not recognize most key presses.  Everything goes back to being fine as soon as I...

I have the old 3 serial port omnipro II, I am currently on firmware 3.11 but have the email notifier board installed and ready to configure.  I was going to order a new chip but have seen a lot of concerns about stability of 3.15, should I wait until 3.16 or later is out before I order a chip?

I would love to know this as well. I'm not willing to buy a WL4 or anything though. If thats the case I'll probably end up getting WHS2011 and installing WHS as a virtual server on it just to run WL3. Myro Control is an alternative to WL3, but right now I don't think that it supports either...

Are you looking for one keypad to control both your omnipro AND Nuvo? Or just sources attached to the Nuvo along with the zones? I have been contemplating using IR to control Nuvo sources, though its not exactly easy to set up. I'm hoping that macros can send IR commands to the IR all out...

Just ordered a few of these. Wish I had seen it earlier, last week the side of my sand filter ruptured and I didn't noticed till half my pool was drained. My pump is connected to a UPB switch, so it will be really easy to add this to turn off the pump if there's no water in the skimmer basket.

Well after a few months of playing with this thing, I used a USBUIRT to find out that the IR blasters were flashing but not sending any IR codes. I found that the easiest way to fix this was to buy the Nuvo IR learning station. The Nuvo keypads have an IR receiver, but rather than pass the IR...

I'm not sure its explicitly stated, but I'm guessing it needs an 8 Ohm load. Wiring two 8 Ohm speakers in series would give it a 16 Ohm load, and wiring two 8 Ohm speakers in parallel would give it a 4 Ohm load. The more speakers in series the less volume you are going to have. So if you want...

Solved my own question. For any other interested parties: At www.homeauto.com there is a 'login' link on the top right corner of the site. For whatever reason I never noticed it before and had always only ever logged into the HAI developer forums. There's a link to download the SDK in there...

I just posted a thread with almost this exact same question, suprised I didn't notice yours. If you find out anything let me know, I've been trying to find out about this as well.

I am looking to just do a basic webpage with polling data from a HAI temperature sensor. Where do I find the HAI Omnipro SDK? Do you have to purchase HAI automation studio or are they two separate things?

I have a Nuvo Essentia E6G setup in my house that I am having trouble with the IR functionality for my Sony XDRF1HD. Pointing my Sony remote at a Nuvo Keypad I am getting the ir emitters for the Nuvo to flash, however it is not controlling the Sony radio. From what I can tell the IR eye is on...

Isn't there conditions called 'dark' and 'light' that are essentially that? 'IF LIGHT' is the same as "IF DAYLIGHT" iirc

It is quite interesting. They've announced a new version http://www.engadget.com/2010/01/05/marvell...-and-2ghz-arma/ for this year which I have been waiting for actual products to hit the shelves. I had considered throwing one in my back shed with a 2 TB hard drive for pseudo off-site storage...

Based on the wording I have a feeling the minimum consumption means you could use 0 gallons of water and those prices would be how much you still have to pay. Thus you pay for the first 1,500 gallons regardless of whether or not you use them. On my bill its listed as a 'convenience fee' for...

I was thinking along the same lines, if it never changes why bother with dydns. I used to use TZO, actually still have it paid through the end of this year. It was configured on my router to update if it changes but it rarely does (only if I hard reset the cable modem). If you register a...