Search results

Recently I noticed a single light in our house was on most mornings after executing an "All Off" on the HAI.  I also noticed that it wasn't responding to the off command and the HAI thought it was off.   So, today I replaced it with a different UPB switch, reprogrammed it and.. same problem. ...

I am finally getting around to adding garage door control to my HAI system.  I am thinking about buying the 4 relay module, but it isn't clear how I could cleanly mount that in the same enclosure as my omni?  I don't see a mounting board, based on the pictures I don't see anywhere for plastic...

Within the past week it appears my Omnipro can no longer talk to one of my Omnistat/2 RC-2000s.  With no changes to either programming, setup, or wiring it now reads zero for temp and humidity, I can no longer control the temperature remotely, and it no longer notices when the security system...

This is the second one that I have bricked, in the same location over about 3 years.  At this point no LED, can't control it with UPB or the paddle.  They oddly don't seem to die during usage, but at some later time.   I am using the HAI UPB Relay switch to control my fireplace.  I have it...

I have been using the trigger app with tasker to fire off some automation around the house. I have a set of the whiztags that work really well except for one use case. I want to put a few tags behind some of my custom engraved light switch plates but the whiztags are slight too big. I tried...

I posted this over in the original thread but this might be a better place to ask.  Now that there is a UPB fan speed control how are people thinking about integrating it with HAI/HLC?   I have a couple of z-wave fan controls that operate on the "dimming range" to control the speed. 0 is off...

Anyone have experience using the Vera with an omnipro 2? I see there is a beta plugin to emulate a the leviton vrcop 3+. I am interested in replacing with the Vera because the tooling with the Vera seems better than what you get with Leviton software (manual routes, invoking healing, etc).

Does anyone know what size the small screw is that holds the faceplate in place on the HLC 6 button room controllers? I called HAI tech support and they told me it was a metric #2. However, when I take a screw from the HLC and try it in a sizing chart, it seems slightly smaller than a metric...

I am starting to feel somewhat limited with HLC. For example, I have a light in my mudroom closet and I have a light in my mudroom. I have an HLC room devoted to closets, so that I can set the All On/All Off. The Mudroom closet light is in the same "room" as all the other closets. I have my...

I am looking for an A/V receiver that has enough power and a good enough HDMI chipset to work with an HDMI over CAT5/6 extender that I have in place. I had a sage HD200, however that died and the HD300 that I replaced it with doesn't work well w/ the extender - the HDMI port seems a bit under...

I am seeing something odd here with what I thought was a fairly straight forward block of code. I have an HAI Scene Switch in which Scene A is set to do a link toggle on one set of lights and scene B was set to do a link toggle on another set. I was running into the problem where the lights...

I had a leviton VRCOP with beaming support and a single ZWave fan module. The VRCOP3 is in the basement and the fan module was on the second floor. I never had any communication problems. I added a kwikset door lock on the first floor and was having intermittent communication problems. This...

Looks like we are getting official lock support this month! http://homeauto.com/newsandevents/pressreleases/content/20120110ZLockIntegration.asp

I have a blocks of code that does not seem to be functioning as I expect. I think it may be because I do not understand how "or"ing works in HAI. 76. WHEN Front Door Timer OFF WHEN Expect Guest Timer OFF AND IF Expect Guest Timer OFF AND IF Front Door Timer OFF AND IF TIME IS GREATER...

I am attempting to setup some rules for when I work at home. I essentially, want to set back the thermostat on the 1st floor. 35. // Thermostat Setbacks 36. WHEN Downstairs Setback Button THEN 1st Floor Thermostat HEAT SETPOINT 62 THEN 1st Floor Thermostat COOL SETPOINT 85 THEN...

Is there a way to restore an RC2000 via programming to the setpoints associated with the security mode? For example, if I perform a setback operation and then later I want the thermostat to restore to the setpoints associated whatever mode the alarm is currently in, is that possible...

I am trying to create a "Morning" button on one of my HLC scene controllers that will disarm the system when pressed under a certain set of criteria. That criteria is that the system is armed in night mode and that no one has open a door or otherwise caused an alarm, that this button would then...

Is there a way to access audio favorites from inside of snaplink mobile? Trying to figure out if its missing or if I just can't find it. It would seem like a bizarre omission if its missing.

I have about 20 HLC devices right now that I have randomly assigned throughout my unit space. I am trying to intelligently map out house before I add any more devices. I am trying to figure out what happens if I add multiple controllers to a "room"? I know that I wouldn't be able to just do a...

Is there a way to have multiple scene switches per room in HLC? I plan for all three scene switches to have the same set of commands, just be in different places in the room. Can I just have the OPII configure each one as the scene switch for the room? That would give them the same ID and...