Search results

Hey, I recently purchased a Home Theater Extender (HTX) in order to control some AV components though the IR function. Unfortunately I cannot seem to find a copy of the Mobile designer software that is used to create the GUI pages. Would anyone have a copy they could send me? Thanks, Nick

Hey; Are you able to connect to it via a serial connection? Can you change the IP of the board via the serial connection, is the port flagged in your router as a static port and not "free IP" for your DHCP to use? My router did that with a few of my 5.7e displays. Thanks, Nick

Hey; Have you figured out your VSC problem yet? Just so you know, the VSC's do not run on your ethernet network. They run on 5v dc from the Hi-Fi 2 panel. VSC Pinout 1- N/C 2- IR Enable - Low When Transmitting 3- IR Ground 4- Data - 5- Data + 6- IR 7- Ground 8- +5v DC I currently have a...

Hey; Just be careful, not all HAI wireless products work with the GE wireless receiver! Made that mistake! If you do switch wireless receivers you will most likely need to switch the wireless contacts. You may find the GE Interlogix receiver on ebay, that's the one I use as well as the HAI...

Hey; Was working in Home Automation Studio and it seems I am missing a few files or everything in the ../engine/internal Would it be possible to get a copy of those files? Thanks, Nick

Hey; I'm wondering if anyone has an old HAI Dock they are looking to get rid of? Would like to setup a music server that would be fully accessible from the OmniTouch 5.7e displays. I've checked ebay but found nothing. I did find the NuvoDock but it doesn't seem to have the same...

Hi; They can probably be repaired, it is strange for the crystal to just stop working. Have you verified the microprocessor has power? A large amount of the components on the board are just to create a clean 12v dc supply and to convert it to 5v dc. Do you get any signal on the Humidity or...

Hey; That would be great! Could you please send that to me? I had started to reverse engineer the Hi-Fi 2 board but now that @McKinneySmart has sent me an older/damaged OmniPro 2 main board I have been working on the schematic and board layout for it. With any luck I should have it done...

Hey; I'm still trying to find a license key or hack for the the omnitouch pro application. As I cannot find anywhere to purchase one. Could someone let me know what the serial number string looks like? i.e. Home automation Studio's key looks like xxxxx-xxxxx-xxxxx-xxxxx . Does the Omnitouch Pro...

Hey; Just one thought, have you check the windows registry for any folders for the Omnitouch Pro application? Some software programs will make a registry entry, including the software key used. It might be trying to validate the install by checking the registry and finding that the software is...

Hey; I've worked on a few of those thermostats. I've got 4 of them. Have you taken them apart yet? If you remove them from the case, so you can see both sides of the PCB you will most likely find that there are crystals growing on parts of the PCB. Sometimes the solder will grown crystals over...

Hey, That would be awesome! I will send you a private message. Thanks, Nick

McKinneySmart; The only reason I use the SPDT relays it for pool valve controls (Hayward or Jandy 24v motorized valves) otherwise yeah SPST works on everything else. They don't have to be driven by anything else, they are simply wired to the same output terminals of the expansion board just as...

Hey, Was tagged in this thread, Just so that everyone knows HAI omniPro systems and Omnitouch 5.7e displays all run at 10M not 100m. My managed Netgear POE switch was a pain to setup until I realized I wanted everything to run at 100M or greater. Once I allowed it to connect at lower speeds the...

McKinneySmart, Expansion Enclosure with relays, its a work in progress. Includes DIP switches to turn off/on the use of each relay in case you are using the output for another reason. And of course with the 44-PLCC Motorola IC.. I am working on another version with SPDT relays instead of...

McKinneySmart, The ribbon cable is a simple/direct 20 pin IDC (pin1 to pin1) to the relay boards, nothing fancy just kept it simple. I have a few unpopulated boards, as I only made up what I needed. But the others could be assembled. All of the boards are the same foot print so the will fit...

Post #3 Surface Mount (LM331) I was able to find some! Finally, I've been working on a wireless soil moisture sensor that connects to the GE Interlogix 315mhz system, it will just trigger a zone into alarm and would activate one or many sprinkler zones until the desired level is reached. No...

Post #2 My version with 44-PLCC Motorola IC.. Common bus relay board, good for irrigation valves.. 16 Channel (8 SPDT & 8 SPST) Relay Board Original HAI Water Temp Sensor Board (not extended range!) My Version (through hole LM331) Continues on next post..

Hey; Here are a few pics of the HAI boards. Original HAI Expansion Board My Version Expansion Enclosure My Versions (Its hard to find the Motorola 40-DIP processor but I can find the 44-PLCC version) A different version with a 20 pin IDC connector for a ribbon cable to connect...

Hi Marshal, For the past few years I have been pulling apart some of my HAI parts and reverse engineering them. I have copied the 16 zone/16 output expansion board, the 16 zone expansion board (connects via the 20 pin ribbon cable), water temp sensor, made up a few different versions of relay...