Search results

Thanks for sharing.

Mike   Thanks for the update. Good to know.

BRAVO    UPSTATE MIKE     for a clear description of the "GREAT AMERICAN GREED"

I have used a number of GRI VS-06 contacts on many windows and they have worked well.

There are many different types of Terminal Blocks out there that could be used.

It is NOT compatible and I do not think Omni has a similar device.

We have installed dozens of 21iP with no issues. Internet monitoring a snap when set up properly. Internet Accessibility is achieved with Total Connect 2.0 which is a added cost up and above monitoring.

GRI Model M-110  MM910 

Teflon pipe thread tape. A thin  double wrap at the bulb side of the thread and life is good. Had this problem with 4 Crafsman chain drive openers and it solved it. 

4204  relay module is made to be wired into honeywell compatible panel keypad wiring and controlled thru the panels programing. Not Compatible.with Omni

Honeywell makes a 3/4 to 3/8 adapter part# 913-WH or 913-Br about $.35 per unit, that you might look at if the 3/4" hole is your option.But I agree smaller is better.

On your keypad use the chime button to toggle Off Beeps Voice

And take ALOT OF GOOD PICTURES OF EVERYTHING you run. It can be priceless when the drywall is up.

Elk sensors Only

Gearhead Thanks for the reply. TR60 address is 1. XSP wiring all good.

Just added a RCS TR60 RS485 to M1G. Can not get the panel to see the TR60. Double checked TR60 settings. Reset all jumpers on XSP to be sure and re enrolled all modules Keypad says T01 not enabled. Any one have any idea. Don't have much hair left, and it is going fast. Thanks

For what it's worth. We use the Ademco/Honeywell 956RPT and the GRI RB-01T in the amount of approx 80 to 100 per month and have no complaints. I can say when mounted on top, and the door jam shifts on the less than well constructed homes, we have had to replace a couple contacts. But on the...

I 2 believe this is a fluke. As we have used this transmitter in dozens of mailboxes, to report delivery with great results.

edge Sorry for the delay in response on the camera question as I missed it. We use camera's that are designed for the specific applications. So we use a wide variety. We have no specific model to use. Some of our customers are very $ minded and some want the best.

Mike T Try this. Disconnect all house phones from your RJ31X jack. This way you can isolate the problem away from your inside wiring. Then you will know something is amiss with the the M1G.