Search results

Hi, my sample house is wired to a omni pro ii console, that communicates with home assistant via mqtt. The console was installed 20+ years ago and it's beginning to have problems, so I'm thinking of a way to switch to something more up to date. I figured a way to substitute anything except the...

I'm continuing my experiments with Arduino and the OPII (think I'm going to call it "HAIDuino" - not great imagination... :D ), and I came up with an interesting result: push notifications of events directly on the Phone. The setup may be a little hard - but I can help with that - and the...

OK, thanks to the help of many people in the forum I finally manged to get a version of the code that I can consider "working". In fact the code needs much much refining and optimization (I am no programmer). The sketch I am posting will allow you to login with the OP II panel, send commands...

I think this deserves a separate topic. In starting my attempt to interface the OP II with arduino I built a serial cable db 9 to rj11 using the pinout on the installer manual of the panel. I the. Tried to connect with PC Access through serial port 1 in the panel and everything is ok: I can...

I am looking to expand the capabilities of the OP II by connecting some of the IN/OUT to and Arduino board. I plan on overcoming some of the limits of the OP II like not having a proper notification system for events or an internet connection, and also to do some more complex programming. For...

I don't remember if I asked for it before, but it would be very nice to have Haiku use the notification center in iOS to notify messages from tht OPII. I don't know if Apple would allow this but I'd like something like a notification when a new message appears (like when the keyboard beeps) or...

Who not share some photos so we can have a glance at the new haiku and maybe share some advice?

I'm planning to connect an energy meter to one of the OP II zones to manage energy loads. The counter uses a transistor internally to give out the signal, so I must input 9 to 24 DC to get it back whenever there is a "pulse" that I want to count with the OP II. Can I just send this 9-24 V DC...

Just curious to know if the new full multitasking of iOS 7 could bring new functions to Haiku. Will it be able to, let's say, send notification when an alarm occurs, or when a certain triggers is activated? Will it be able so maybe send mail when an event occours? These would be nice features...

as I said in one of my prviuos post I'm using a IP camera as gate watcher. I have set up a relais that activates one of the security zone on the expansion board whenever someone rings the doorbell. I then wrote some code that executes a "doorbell" button when the zone goes on alarm, and told...

I was wondering if there's a humidity sensor compatible wigh HAI. I'm looking for a humidity only sensor to put in wall sockets, the omnistat are too much for my use. I'd like to be able to read the HR% and set the thresold via Omni to command the vent in a windowless room and I don't want...

I guess many in this forum are using an iPad as HAI touchpad. I'm looking around to find a convenient and not too expensive solution (I've seen motorized ones for 1000 $ - that's a little too much). What are you using and what is your experience?

My IP cam arrived and I'm struggling to make it work with Haiku. I'm experimenting with addresses but I can't seem to make it pop up correctly. I can access fine via my browser, after logging in I click on the image and it points me to an address like...

I am aware that there is HaikuHelper that can do anything with the data form my OmniPro BUT: It's MAC only (I can't afford one just for Home automation! Still have to try out Hackintosh...); it requires a computer always on, which may be a problem for someone; so my suggestion is to have a way...

Here I am with another request (I like Haiku and I'm experimentinga lot with it!). As I requested in another thread it quold be nice to have separate ON and OFF buttons. Another thing that would come in handy is the opportunity to have DIM/BRIGHT buttons instead of just the slider. This is...

Hi, I've installed some Marmitek SW12 X10 modules (you can find specs here: http://www.marmitek.com/en/product-details/home-automation-security/x-10-home-automation/micro-modules/sw12.php ) to control shutters opening/closing. I wired and connected them with no problems, but now I'm able to...

As I said I'm planning on using an iPad to substitute my omni keypad and one of the functions I'd like to have is an IP camera that will automatically show up on doorbell ring; once I did that I also want to be abile to open the gate and/or the front door that are now associated to buttons. The...

I'm Using the iPhone version of Haiku and I'm really satisfied, so much that I'm planning to buy an iPad to replace my Main omni keypad. For what I could figure out from the app store terms it looks like I don't have to buy another license as long as the iPhone and iPad are both registered to my...

Another minor flaw I found: since some (most of in my case) of the X10 modules don't send X10 codes when manually activated (Marmitek AW 12 modules) the state of the units represented in the console and consequently in Haiku isn't always right. But the unit switch in Haiku is just a trigger...

Hi, I'm using th iPhone app and everything works great, except for some minor flaws. One is the temperature sensors not showing up. I'm not using Thermostats, just sensors that allow me to set an Hi and Lo threshold. They show up just fine in PC Access and I can control them, but in the app they...