Hi Don,
I unfortunately didn't get any paperwork back with my repair. I paid for expedited 1-day repair service and overnight shipping if that tells you anything. I did take pictures of my board's serial number and I'm confident I got my same board back.
Sorry I cannot be more helpful...
I sent my OP2 to Leviton under their RMA program. Board came back and was reinstalled, project files uploaded with PCA and everything is working perfectly. I hope others have a similar experience if they need to have their OP board repaired.
I am pleased to report that I sent my OP2 to Leviton under their RMA program. Board came back and was reinstalled, project files uploaded with PCA and everything is working perfectly. Hope my OP2 continues to serve me for many years to come.
Hi Pete. Thanks for your help. Not exactly sure what you mean so Ive attached a picture. Can you see anything that looks blown or bulging? Happy to upload more photos if Im looking in the wrong place.
Thanks!
Issue Background:
Stable HAI OP2 (4.0B) in place for 10+ years with no changes to hardware/software in 2 years.</li>
While away on vacation I received Omni Notifier message Freeze Alarm "FREEZE ALARM TRIPPED</li>
5 minutes later I received Omni Notifier message ALARM RESET</li>
It's the...
Issue Background:</p>
Stable HAI OP2 (4.0B) in place for 10+ years with no changes to hardware/software in 2 years.</li>
While away on vacation I received Omni Notifier message Freeze Alarm "FREEZE ALARM TRIPPED</li>
5 minutes later I received Omni Notifier message ALARM RESET</li>
It's the...
Update. I'm happy to report that it's been over two weeks since I changed our my ELK power supply and back up battery and I've been trouble free. Guessing the PS was failing and I had an old battery. So if you have similar issues, I'd suggest changing out the PS....simple and cheap solution.
Hi Pete,
It's been 24 hours and with the new ELK power supply I haven't had a system reset. Ordered a new battery, but based on your comments, I'm guessing the power supply is more of the root cause.
Thanks again for your help.
Geoff
Thanks Pete. You are correct as the battery level is now at 221. I'll buy a replacement battery and let you know if the new ELK transformer and battery fix the issue.
Hi Pete,
As always, thanks for the quick reply and help.
"Guessing you have checked the battery (or batteries). Bad lightning storm could damage the board."
When I check the battery with my voltage meter it reads 13.7v, but checking the battery level in PCA it reads "0" but My battery...
Hello,
Here is what I'm experiencing:
1) HAI Keypads start beeping and keypad display reads NO CONTROLLER DATA.
2) OPII loses all Automation programming. Determined by using PCA.
3) Using PCA I rewrite automation blocks from file to OP2.
4) OPII runs as expected for a few hours or days then...
Hi, I am having similar SYSTEM RESET issues. OPII would lose all Automation programming and I would rewrite automation blocks to OPII with PCAcess. OPII would run well for about a week, then reset. Went out of town for a week and unplugged Sonos to see if that was the problem, but got a system...
Hi JonW,
Thanks for your response. I agree that would like to keep the HLC status tracking features. Do you have any suggestions on how I can incorporate two SA I/O devices as garage door openers into my current UPB HLC set up?
Thanks for your help!
Geoff
I should note that I'm comfortable using PCA but have just started to learn UPStart. Here are the details on how PCS/UPStart describes what is needed to program UPB for OMNI using UPStart and PCA.
http://www.pcslighting.com/resources/PulseWorx/Software/PWX_200_OMNI_Device_Setup.pdf
Thanks...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.